Greases & lubricants
Rolgard PTFE Reinforced Grease
Rolgard® is a high-performance, high-temperature lithium-based grease reinforced with PTFE. It deposits a fine, tenacious film on metal surfaces — PTFE micro-particles act like tiny ball bearings to minimise friction and heat build-up, even at high speeds and temperatures (−5°C to +250°C).

Product details
Rolgard® is a high-performance, high-temperature lithium-based grease reinforced with PTFE. It deposits a fine, tenacious film on metal surfaces — PTFE micro-particles act like tiny ball bearings to minimise friction and heat build-up, even at high speeds and temperatures (−5°C to +250°C). Key lab results include drop point 256°C (ASTM D–566), NLGI 2 penetration, and pass rust-prevention (ASTM D–1743). Full test report available on request. Sanmar Enterprises supplies Rolgard® with authorised JD Jones channel support across North India — share your duty for packaging, datasheets and a commercial offer.
- ✓Effective lubrication up to 250°C; service range −5°C to +250°C
- ✓Excellent for all metal-to-metal lubrication
- ✓Chemically and mechanically stable — does not soften or harden like ordinary greases
- ✓Excellent thermal stability; resists oil separation and migration from hot surfaces
- ✓Excellent shear stability — stays where applied for extended periods
- ✓Reduces friction, wear, noise and vibration (especially large gears)
- ✓Controls heat build-up and cuts wasteful energy consumption
- ✓Contains no chlorine or silicone
- ✓High dielectric strength; greater malleability than graphite or MoS₂
- ✓Joints treated with Rolgard® dismantle easily even after years
- ✓Increases equipment life and minimises downtime / maintenance costs
- ✓Spec — Drop point (ASTM D–566): 256°C
- ✓Spec — Evaporation loss (ASTM D–972): 2.56%
- ✓Spec — Mean Hertz load / weld load (FTM 6503.2): 47 kg / 224 kg
- ✓Spec — Oil separation (FTM 321.2): 2.176%
- ✓Spec — Penetration unworked / worked 60 (ASTM D–217): 274 / 284 (NLGI 2)
- ✓Spec — Penetration worked 100,000 strokes (ASTM D–217): 311
- ✓Spec — Rust preventive (ASTM D–1743): Pass
- ✓Spec — Water washout (ASTM D–1264): 2.86%
- ✓Spec — 4-ball wear scar (ASTM D–2266): 0.670 mm
- ✓Spec — Boiling water immersion (FTM 3463.1): no emulsification
Authorised supply via Sanmar
Display listing for selection support. Confirm datasheets, materials and commercial terms with our sales desk before purchase decisions.
